Manualsbrain.com
  1. Manuels
  2. Marques
  3. 3com
  4. S7906E
  5. Guide De Référence

3com S7906E Guide De Référence

Télécharger
Page de 2327
 
1-39 
[Sysname] ospf 100 
[Sysname-ospf-100] import-route rip 40 type 2 tag 33 cost 50 
log-peer-change 
Syntax 
log-peer-change 
undo log-peer-change 
View 
OSPF view 
Default Level 
2: System level 
Parameters 
None 
Description 
Use the log-peer-change command to enable the logging of OSPF neighbor state changes. 
Use the undo log-peer-change command to disable the logging. 
The logging is enabled by default. 
With this feature enabled, information about neighbor state changes is displayed on the terminal until 
the feature is disabled. 
Examples 
# Disable the logging of neighbor state changes for OSPF process 100.  
<Sysname> system-view 
[Sysname] ospf 100 
[Sysname-ospf-100] undo log-peer-change 
lsa-arrival-interval 
Syntax 
lsa-arrival-interval interval 
undo lsa-arrival-interval 
View 
OSPF view 
Default Level 
2: System level 
Parameters 
interval: Specifies the minimum LSA repeat arrival interval in milliseconds, in the range 0 to 60000.