Manualsbrain.com
  1. Manuels
  2. Marques
  3. 3com
  4. S7906E
  5. Guide De Référence

3com S7906E Guide De Référence

Télécharger
Page de 2327
 
1-62 
View 
OSPF area view 
Default Level 
2: System level 
Parameters 
no-summary: Usable only on a stub ABR. With it configured, the ABR advertises only a default route in 
a Summary LSA into the stub area (such a stub area is known as a totally stub area). 
Description 
Use the stub command to configure an area as a stub area.  
Use the undo stub command to remove the configuration. 
No area is stub area by default.  
Note that, to concel the no-summary configuration on the ABR, simply execute the stub command 
again to overwrite it. 
To configure an area as a stub area, all routers attached to it must be configured with this command. 
Related commands: default-cost. 
Examples 
# Configure Area1 as a stub area. 
<Sysname> system-view 
[Sysname] ospf 100 
[Sysname-ospf-100] area 1 
[Sysname-ospf-100-area-0.0.0.1] stub 
stub-router 
Syntax 
stub-router 
undo stub-router 
View 
OSPF view 
Default Level 
2: System level 
Parameters 
None 
Description 
Use the stub-router command to configure the router as a stub router.  
Use the undo stub-router command to restore the default. 
By default, no router is configured as a stub router.