3com S7906E Guide De Référence
1-29
ip-prefix ip-prefix-name: Specifies the name of an IP prefix list that is used to filter routes calculated
from received LSPs, a string of 1 to 19 characters. For IP prefix list configuration information, refer to
Routing Policy commands in the IP Routing Volume.
route-policy route-policy-name: Specifies the name of a routing policy that is used to filter routes
calculated from received LSPs, a string of 1 to 19 characters. For routing policy configuration
information, refer to Routing Policy commands in the IP Routing Volume.
Description
Use the filter-policy import command to configure IS-IS to filter routes calculated from received LSPs.
Use the undo filter-policy import command to disable IS-IS from filtering routes calculated from
received LSPs.
IS-IS does not filter routes calculated from received LSPs by default.
Related commands: filter-policy export.
Examples
# Reference ACL 2000 to filter routes calculated from received LSPs.
<Sysname> system-view
[Sysname] isis
[Sysname-isis-1] filter-policy 2000 import
flash-flood
Syntax
flash-flood [ flood-count flooding-count | max-timer-interval flooding-interval | [ level-1 | level-2 ] ] *
undo flash-flood [ level-1 | level-2 ]
View
IS-IS view
Default Level
2: System level
Parameters
flood-count flooding-count: Specifies the maximum number of LSPs to be flooded before the next SPF
calculation, ranging from 1 to 15. The default is 5.
max-timer-interval flooding-interval: Specifies the delay (in milliseconds) of the flash flooding, ranging
from 10 to 50000. The default is 10.
level-1: Enables flash flooding for level-1.
level-2: Enables fast-flooding for level-2.
Description
Use the flash-flood command to enable IS-IS LSP flash flooding.
Use the undo flash-flood command to disable IS-IS LSP flash flooding.
IS-IS LSP flash flooding is disabled by default.
If no level is specified, the command enables IS-IS LSP flash flooding for both Level-1 and Level-2.