3com S7906E Guide De Référence

Page de 2327
 
1-47 
undo isis timer lsp 
View 
Interface view 
Default Level 
2: System level 
Parameters 
time: Specifies the minimum interval in milliseconds for sending link-state packets, ranging from 1 to 
1000.  
count: Specifies the maximum number of link-state packets to be sent at one time, in the range of 1 to 
1000. The default is 5.  
Description 
Use the isis timer lsp command to configure the minimum interval for sending LSPs on the interface 
and specify the maximum LSPs that can be sent per time.  
Use the undo isis timer lsp command to restore the default of 33ms.  
Related commands: isis timer retransmit
 
 
This command is not available in loopback interface view.  
 
Examples 
# Configure the interval as 500 milliseconds for sending LSPs on interface VLAN-interface 10.  
<Sysname> system-view 
[Sysname] interface vlan-interface 10 
[Sysname-Vlan-interface10] isis timer lsp 500 
isis timer retransmit 
Syntax 
isis timer retransmit seconds 
undo isis timer retransmit 
View 
Interface view 
Default Level 
2: System level