3com S7906E Guide De Référence

 

1-39 

# In BGP view, configure route 10.0.0.0/16 as a shortcut route. 

<Sysname> system-view 

[Sysname] bgp 100 

[Sysname-bgp] network 10.0.0.0 255.255.0.0 short-cut 

# In BGP-VPN instance view, configure route 10.0.0.0/16 as a shortcut route. (the VPN has been 

created). 

<Sysname> system-view 

[Sysname] bgp 100 

[Sysname-bgp] ipv4-family vpn-instance vpn1 

[Sysname-bgp-vpn1] network 10.0.0.0 255.255.0.0 short-cut 

peer { group-name | ip-address } advertise-community 

undo peer { group-name | ip-address } advertise-community 

BGP view/BGP-VPN instance view 

2: System level 

group-name: Name of a peer group, a string of 1 to 47 characters. 

ip-address: IP address of a peer.  

Use the peer advertise-community command to advertise the community attribute to a peer/peer 

group.  

Use the undo peer advertise-community command to disable the community attribute advertisement 

to a peer/peer group. 

By default, no community attribute is advertised to any peer group/peer. 

Related commands: ip community-list, if-match community, apply community (refer to Routing 

Policy Commands in the IP Routing Volume). 

# In BGP view, advertise the community attribute to peer group test. 

<Sysname> system-view 

[Sysname] bgp 100 

[Sysname-bgp] peer test advertise-community 

# In BGP-VPN instance view, advertise the community attribute to peer group test (the VPN has been 

created).