3com S7906E Guide De Référence

 

1-11 

System view 

2: System level 

process-id: RIPng process ID, in the range of 1 to 65535. The default value is 1. 

Use the ripng command to create a RIPng process and enter RIPng view. 

Use the undo ripng command to disable a RIPng process. 

By default, no RIPng process is enabled. 

# Create RIPng process 100 and enter its view. 

<Sysname> system-view 

[Sysname] ripng 100 

[Sysname-ripng-100] 

# Disable RIPng process 100. 

[Sysname] undo ripng 100 

ripng default-route { only | originate } [ cost cost ] 

Interface view 

2: System level 

only: Indicates that only the IPv6 default route (::/0) is advertised through the interface. 

originate: Indicates that the IPv6 default route (::/0) is advertised without suppressing other routes. 

cost: Metric of the advertised default route, in the range of 1 to 15, with a default value of 1. 

Use the ripng default-route command to advertise a default route with the specified routing metric to a 

RIPng neighbor. 

Use the undo ripng default-route command to stop advertising or forwarding the default route. 

By default, a RIP process does not advertise any default route.