3com S7906E Guide De Référence

 

1-16 

Use the undo flow-interval command to restore the default interval. 

# Set the time interval for collecting interface statistics to 100 seconds. 

<Sysname> system-view 

[Sysname] interface ethernet 2/0/1 

[Sysname-Ethernet2/0/1] flow-interval 100 

group-member interface-list 

undo group-member interface-list 

Port group view 

2: System level 

interface-list: Ethernet interface list, in the form of interface-type interface-number [ to interface-type 

interface-number ] &<1-10>, where &<1-10> indicates that you can specify up to 10 port or port ranges. 

Use the group-member command to add an Ethernet interface to a specified manual port group. 

Use the undo group-member command to remove a specified Ethernet interface from a manual port 

group. 

By default, there is no Ethernet interface in a manual port group. 

# Add interface Ethernet 2/0/1 to the manual port group named group1. 

<Sysname> system-view 

[Sysname] port-group manual group1 

[Sysname-port-group-manual-group1] group-member ethernet 2/0/1 

interface interface-type interface-number   

System view 

2: System level