3com S7906E Guide D’Installation Rapide

 

6-3 

By default, no password is set for the switch and you can press Enter to enter the boot menu. 

 

While using the switch, keep in mind the modified Boot ROM password. 

 

           BOOT  MENU          

1:  Download application file to device  

2:  Select application file to boot  

3:  Display all files in device 

4:  Delete file from device  

5:  Modify bootrom password  

0:  Reboot  

 

Enter your choice(0-5): 

Trivial File Transfer Protocol (TFTP) is a TCP/IP protocol used for file transmission between client and 

server. TFTP provides the unreliable data stream transfer service over UDP. 

1)  Connect the switch to the PC that stores the file to be downloaded through the 

management/upgrade Ethernet port (the IP address of the PC is required). Connect the switch to a 

PC through the console port (the two PCs can be the same one). 

2)  Run the TFTP Server program on the PC connected to the Ethernet port, and specify the file 

directory of the program to be downloaded.  

3)  Run the terminal emulation program on the PC connected to the console port. Start the switch, 

enter the boot menu (refer to section “

” on page 

), and enter 1 when the system 

displays “Enter your choice(0-5):” to enter the download protocol menu: 

        BOOT  MENU 

 

1. Download application file to device 

2. Select application file to boot 

3. Display all files in device 

4. Delete file from device 

5. Modify bootrom password 

0. Reboot 

 

Enter your choice(0-5): 1 

4)  On the download protocol menu, type 1 to select TFTP, and then press Enter to set the TFTP 

parameters: 

1. Set TFTP protocol parameter 

2. Set FTP protocol parameter