3com S7906E Guide D’Installation Rapide
1-18
Item
Specifications
Interfaces
z
One compact flash (CF) card interface
z
One console port, used for local or remote configuration
and management of the switch through a dialup
configuration
and management of the switch through a dialup
configuration
z
One 10/100Base-TX management Ethernet port
Power consumption
10 W to 15 W
The dimensions of the S7900E series are expressed in the form of H × W × D, where
H: Height of the front panel of the card.
W: Width of the part inserted into the chassis, instead of that of the front panel.
D: Depth from the front panel to the other end, excluding the length of the handle.
Panel and LEDs
shows the front panel of the LSQ1MPUA0.
Figure 1-17 Front panel of the LSQ1MPUA0
(1) CF card interface and CFS LED
(2) Console port
(3) 10/100Base-TX Ethernet port for management and LEDs
(4) Power and fan tray status LEDs
(4) Power and fan tray status LEDs
(5) LPU status LEDs
(6) ACTIVE LED of LSQ1MPUA0
(7) RESET button
On-board interfaces
z
CF card slot
The CF card slot can accommodate a standard CF card (Type I or Type II), where you can store host
software and logs, and thus upgrade software conveniently. The CF card is hot swappable.
describes the CFS LED on the right of the CF card.
Table 1-16 Description of the CFS LED
Status
Description
OFF
No CF card is in position.
ON
The CF card is in position.