3com S7906E Guide D’Installation Rapide

 

1-26 

Figure 1-19 Front panel of the LSQ1SRP2XB0 

 

(1) CF card slot and CFS LED 

(2) 10GBase-R-XFP Ethernet ports and LEDs 

(3) Console port 
(4) 10/100Base-TX Ethernet port for management and LEDs 
(5) Power and fan tray status LEDs 

(6) LPU status LEDs 

(7) ACTIVE LED of LSQ1SRP2XB0 

(8) RESET button 

 

z 

CF card slot 

The CF card slot can accommodate a standard CF card (Type I or Type II), where you can store host 

software and logs, and thus upgrade software conveniently. The CF card is hot swappable.  

 describes the CFS LED on the right of the CF card. 

Table 1-34 Description of the CFS LED 

OFF 

No CF card is in position. 

ON 

The CF card is in position. 

 

z 

10GBase-R-XFP Ethernet ports 

Table 1-35 Specifications of the 10GBase-R-XFP Ethernet ports 

Connector type 

LC 

Number of interfaces 

2 

Interface standard 

10GBase-R 

Applicable fiber module 

Refer to “Appendix A  List of Pluggable Modules.” 

 

 describes the status LEDs of 10GBase-R-XFP Ethernet ports. 

Table 1-36 Description of the status LEDs of 10GBase-R-XFP Ethernet ports 

LINK 

z 

OFF: No link is present. 

z 

ON: A link is present. 

ACT 

z 

OFF: No data is being transmitted or received. 

z 

Blinking: Data is being transmitted or received. 

 

z 

Console port 

Using an RJ-45 connector, the console port can be connected through a regular asynchronous serial 

cable directly to a computer for system debugging, configuration, maintenance, management, and host