3com S7906E Guide D’Installation Rapide
1-33
Figure 1-21 Front panel of the LSQ1SRP1CB0
(1)
(2)
(3)
(4)
(5)
(7)
(6)
(1) CF card slot and CFS LED
(2) Console port
(3) 10/100Base-TX Ethernet port for management and LEDs
(4) Power and fan status LEDs
(4) Power and fan status LEDs
(5) LPU status LEDs
(6) ACTIVE LED of LSQ1SRP1CB0
(7) RESET button
On-board interfaces
z
CF card slot
The CF card slot can accommodate a standard CF card (Type I or Type II), where you can store host
software and logs, and thus upgrade software conveniently. The CF card is hot swappable.
describes the CFS LED on the right of the CF card.
Table 1-52 Description of the CFS LED
Status
Description
OFF
No CF card is in position.
ON
The CF card is in position.
z
Console port
Using an RJ-45 connector, the console port can be connected through a regular asynchronous serial
cable directly to a computer for system debugging, configuration, maintenance, management, and host
software loading, or to a modem for remote system debugging, configuration, maintenance and
management.
Table 1-53 Specifications of the console port
Item
Specifications
Connector type
RJ-45
Number of connectors
1
Interface standard
Asynchronous EIA/TIA-232
Baud rate
115,200 bps (defaulting to 9,600 bps)
Transmission distance
15 m (49.21 ft.)
Functions
z
It can be connected to an ASCII terminal.
z
It can be connected to a serial port of a local or
remote (through a pair of modems) PC running
terminal emulation program.
remote (through a pair of modems) PC running
terminal emulation program.
z
10/100Base-TX management Ethernet port