3com S7906E Guide D’Installation Rapide

Page de 155
 
1-36 
Item 
Specifications 
DDR SDRAM 
512 MB 
Dimensions (H x W x D) 
45 × 377 × 355 mm (1.77 × 14.84 × 13.98 in.) 
Interfaces 
One CF card slot 
One console port, used for local or remote configuration 
and management of the switch through a dialup 
connection 
One 10/100Base-TX management Ethernet port 
Power consumption 
50 W to 60 W 
 
Panel and LEDs 
 shows the front panel of the LSQ1SRPD0. 
Figure 1-22 Front panel of the LSQ1SRPD0 
 
(1) CF card slot and CF card status LED 
(2) Console port 
(3) 10/100Base-TX management Ethernet port and LEDs
(4)Power module and fan status LEDs 
(5) LPU status LEDs 
(6) ACTIVE LED of LSQ1SRPD0 
(7) RESET button 
 
On-board interfaces 
CF card slot 
The CF card slot can accommodate a standard CF card (Type I or Type II), where you can store host 
software and logs and thus upgrade software conveniently. The CF card is hot swappable.  
Console port 
Using an RJ-45 connector, the console port can be connected through a regular asynchronous serial 
cable directly to a computer for system debugging, configuration, maintenance, management, and host 
software loading, or to a modem for remote system debugging, configuration, maintenance and 
management. 
Table 1-60 Specifications of the console port 
Item 
Specifications 
Connector type 
RJ-45 
Number of connectors 
Interface standard 
Asynchronous EIA/TIA-232 
Baud rate 
115,200 bps (defaulting to 9,600 bps) 
Transmission distance 
15 m (49.21 ft.) 
Functions 
It can be connected to an ASCII terminal. 
It can be connected to a serial port of a local or remote (through 
a pair of modems) PC running terminal emulation program.