3com S7906E Guide D’Installation Rapide

Page de 155
 
1-61 
Item 
Specifications 
Pluggable module type 
Pluggable modules for EPON interfaces 
Gigabit SFP module  
100 Mbps SFP module  
Refer to “Appendix A  List of Pluggable Modules.” 
Standards 
IEEE 802.3-2005 
IEEE 802.1D-2004 
IEEE 802.1Q-2003 
IEEE802.1X-2004 
 
Panel and LEDs 
Figure 1-41 LSQ1PT16PSC0 panel 
 
 
Each EPON port has a green LED. 
 describes the LED of each EPON port. 
Table 1-116 Description of the EPON port status and the LED status of the LSQ1PT16PSC0 
LED status 
EPON port status 
Description 
OFF 
Down 
No SFP module is installed. 
OFF 
UP 
An SFP module is installed but no ONU is registered. 
ON 
UP 
An ONU is registered. 
 
Likewise, each 1000Base-X-SFP/100Base-FX-SFP Ethernet port has a green LED. 
 
describes the LED of each 1000Base-X-SFP/100Base-FX-SFP Ethernet port. 
Table 1-117 Description of the LED of each 1000Base-X-SFP/100Base-FX-SFP Ethernet port 
LED 
Description 
LINK/ACT 
OFF: No link is present. 
ON: A link is present. 
Blinking: Data is being transmitted or received. 
 
Ordering Information for the S7900E Series 
The S7900E series are delivered by module to meet various requirements of users. You can purchase 
the switch and SRPU modules as you need. 
Purchasing a Switch 
While purchasing a switch, take the following factors into consideration. 
Networking requirements 
Location of this switch in the networking scenario, and the role it plays