3com 3c100xf Mode D'Emploi
Uploading Configuration Files (Bulk File) Commands
3-11
Uploading
Configuration Files
(Bulk File) Commands
Configuration Files
(Bulk File) Commands
Bulk files are created for uploading configuration files to the OfficeConnect
Gateway.
Gateway.
The following table identifies the Bulk File commands.
save configuration
Saves individual configuration files (.CFG) to a bulk configuration file for uploading
to the OfficeConnect Gateway. You can name the bulk configuration file with the
set bulk file <file name> command. The reset command breaks out individual
configuration files from the bulk configuration file.
to the OfficeConnect Gateway. You can name the bulk configuration file with the
set bulk file <file name> command. The reset command breaks out individual
configuration files from the bulk configuration file.
set bulk_file <file_name>
The set bulk_file <file_name> command specifies the name of an OfficeConnect
Gateway bulk configuration file, which is the compressed concatenation of
individual OfficeConnect Gateway configuration files (.CFG) used for uploading to
the OfficeConnect Gateway. You can name one of two bulk configuration files
with the set bulk_file <file_name> command and break out individual
configuration files from the bulk configuration file with the reset command.
Gateway bulk configuration file, which is the compressed concatenation of
individual OfficeConnect Gateway configuration files (.CFG) used for uploading to
the OfficeConnect Gateway. You can name one of two bulk configuration files
with the set bulk_file <file_name> command and break out individual
configuration files from the bulk configuration file with the reset command.
show bulk_file
The show bulk_file command displays the name of the OfficeConnect Gateway
bulk configuration file and any error associated with the file. This binary file is a
concatenation of individual OfficeConnect Gateway configuration files (.CFG)
used to upload to the OfficeConnect Gateway. For example:
bulk configuration file and any error associated with the file. This binary file is a
concatenation of individual OfficeConnect Gateway configuration files (.CFG)
used to upload to the OfficeConnect Gateway. For example:
Restore Factory
Default Settings
Default Settings
This section describes the following Restore Factory Default Settings related
commands:
commands:
000080
64206d61
78206e00
43453032
41742031
max
n*CE02At
000090
373a3136
3a31342c
20466163
696c6974
17:16:14,
Facility
0000a0
79202255
73657220
4d616e61
67657222
"User
Manager",
Command Type
Command Name
Save
save configuration
Set
set bulk_file <file_name>
Show
show bulk_file
Bulk Configuration File Name:
ConfigBulkFile
Bulk Configuration Error:
Command Type
Command Name