Clarion ezd580 Mode D'Emploi

 
 

  

  

49

 

This value appears on the map screen in the Trip Data area.[SEG] This 
is the value at the top. 

 

This value appears on the map screen in the Trip Data area.[SEG] This 
is the value in the middle. 

 

This value appears on the map screen in the Trip Data area.[SEG] This 
is the value at the bottom. 

The Trip Computer screen provides collected trip data.[SEG] It can be opened from the Trip 

Information screen by tapping 

. 

The fields on this screen are continuously updated while you keep the screen open. 
You can switch between the trips, pause then resume them, or reset their data. 
You have the following functions on this screen: 

 

Pauses the trip currently shown on the screen.[SEG] Values on the screen 
stop changing. 

 

This button replaces the previous one if it has been activated.[SEG] Tap it to 
resume collecting trip data. 

 

Resets all counters of the currently shown trip.[SEG] Collecting trip data is 
restarted only when Clarion EZ Drive receives a position from the GPS. 

 , 

 

Cycles through all trips. 

The Cockpit menu is a selection of controls that are frequently needed during navigation. It can be 

opened directly from the Map screen by tapping 

. 

 

If you tap any of the switches in the Cockpit menu except for the Vehicle type, the Map screen 
immediately returns. A switch is on if its lamp is lit. The Vehicle type button is different. It is a multi-