Xanté 8300 Mode D'Emploi

The maximum amount of RAM disk available is equal to the total
RAM installed minus the amount of RAM required for standard
printer operation (a minimum of 8 MB). For example, a printer with
64 MB of RAM has 56 MB (64 - 8 = 56) available. RAM disk can be
enabled in 1 MB increments up to the maximum available amount. The
printer's default is 0, which disables RAM disk.

When RAM disk is set high, the initialization process can be
extended at start-up.

Accurate Calibration Technology

X•ACT (XANTÉ’s patent pending Accurate Calibration Technology)
allows you to calibrate the printer to print more precise horizontal and
vertical lines.

Because of manufacturing variations and usage, a printer may not
print lines with the exact dimensions specified by the application.
X•ACT allows you to calibrate your printer to compensates for these
differences.

Your printer is calibrated before it is shipped, but it may drift out of
alignment over time. After using X•ACT to calibrate the line lengths,
adjust the alignment of the imageable area on the page using
Command Center. See “Procedures” in chapter 3 (Macintosh) or
chapter 4 (PC) for details on using X•ACT and your printer’s margin
alignment functions.

◊ ◊ ◊