Xanté aw 1200 Guide De Référence
17
Installation-Windows 98/Me (continued)
Fig. 78 Select Device Options to Configure
your Printer. Click Apply, then OK.
your Printer. Click Apply, then OK.
Note:
Make changes for options installed
on your printer by first highlighting
the option. Then, select the setting
under Change Setting.
on your printer by first highlighting
the option. Then, select the setting
under Change Setting.
Fig. 79 Setup Complete. Click Finish.
Note:
If you selected to read the ReadMe
file, do so and then, close the
window.
file, do so and then, close the
window.
Configuring IP, SubNet, and Gateway
Addresses
Addresses
1.
From the ps_files folder on the XANTÉ
CD-ROM, copy dhcpoff.ps to your c:\
drive.
CD-ROM, copy dhcpoff.ps to your c:\
drive.
2.
Go to DOS (Command) Prompt.
3.
Type copy dhcpoff.ps to lpt1.
4.
Power cycle the printer (turn off, then
back on).
back on).
5.
Using a word processing application,
open setipsub.ps file from the ps_files
folder. Edit the file so it contains the IP,
Subnet, and Gateway address you
obtained from your network administra-
tor. Save the file to your c:\ drive.
open setipsub.ps file from the ps_files
folder. Edit the file so it contains the IP,
Subnet, and Gateway address you
obtained from your network administra-
tor. Save the file to your c:\ drive.
6.
Go to DOS (Command) Prompt.
7.
Type copy setipsub.ps to lpt1.
8.
Power cycle the printer again and verify
that the start-up page contains your IP,
Subnet, and Gateway addresses.
that the start-up page contains your IP,
Subnet, and Gateway addresses.
9.
Go to DOS (Command) Prompt to ping
the printer.
the printer.
c:\ping (IP Address)
Note:
If you can ping the printer, go on to
step 10. If you cannot ping your
printer, contact your Network
Administrator.
step 10. If you cannot ping your
printer, contact your Network
Administrator.
10. Go to your Printer Properties (fig. 80) and
select the Details Tab (fig. 81).