Xanté aw 1200 Guide De Référence
9
Connecting to Printer Ports (continued)
2.
Plug the 36-pin connector into the
printer’s parallel port and the 25-pin
connector into the computer’s parallel
port.
printer’s parallel port and the 25-pin
connector into the computer’s parallel
port.
3.
Turn on both machines.
4.
Configure for ECP or bidirectional
parallel port mode in your computer
setup (i.e. BIOS or CMOS).
parallel port mode in your computer
setup (i.e. BIOS or CMOS).
Note:
Before using your printer, install
and configure the Adobe PostScript
printer driver and your printer’s
PPD.
and configure the Adobe PostScript
printer driver and your printer’s
PPD.
Ethernet Port (Macintosh & PC)
1.
Turn off your printer and your com-
puter.
puter.
RJ-45
Connector
Ethernet Port
Fig. 32 Connect to Ethernet port.
2.
Connect one end of the CAT 5 Ethernet
cable to your printer’s Ethernet port.
cable to your printer’s Ethernet port.
3.
Connect the cables other end to the
appropriate port on your network.
appropriate port on your network.
USB Connection (PC only*)
Connector
To Host Computer
To Host Computer
Connector
To Printer
Fig. 33 USB Cable
1.
Plug the cable’s square, smaller connec-
tor into the printer’s USB port.
tor into the printer’s USB port.
2.
Plug the thin, larger connector into the
computer’s USB port.
computer’s USB port.
Note:
It is not necessary to turn off your
printer or computer before plugging
in the USB.
printer or computer before plugging
in the USB.
*USB does not support Windows 98 or Me
Media Types
The AW1200 can handle a wide variety
of media such as:
•
Plain paper
•
Transparencies
•
Laser-quality labels
•
Envelopes (No. 4 only)
•
Tracing paper
•
Postcard stock
Note:
The print area is 5 mm (0.197”)
from all edges, except with No. 4
envelopes which is 10 mm. Also,
from all edges, except with No. 4
envelopes which is 10 mm. Also,