Xanté aw 1200 Mode D'Emploi
5-14 – XANTÉ Utilities: Macinstosh and PC
2.
Select Printer Information: Diagnostic Information (fig. 5.16). The Diagnostic
Information window appears (fig. 5.17).
Information window appears (fig. 5.17).
Fig. 5.17 Diagnostic Information Window
3.
Check the right side of the window (fig. 5.17) to determine the condition of
your printer’s E
your printer’s E
2
Prom.
If the E
2
Prom condition is good, you don't have to do anything; if it is bad or missing,
contact XANTÉ Technical Support.
4.
Close your browser.
General Information
The General Information option lists miscellaneous printer details. These include the
product name, PostScript version, current firmware revision, boot RAM version,
RAM size, engine speed, page count, and PostScript margin settings as well as whether
the startup-page and low toner page printing is enabled (on) or disabled (off).
product name, PostScript version, current firmware revision, boot RAM version,
RAM size, engine speed, page count, and PostScript margin settings as well as whether
the startup-page and low toner page printing is enabled (on) or disabled (off).
1.
Go to the printer home page (fig. 5.7). See “Printer Home Page” earlier in this
chapter for details.
chapter for details.
2.
Select Printer Information: General Information (fig. 5..16). The General
Information window appears (fig. 5.18).
Information window appears (fig. 5.18).
Fig. 5.18 General Information Window
3.
Check the desired printer information; then, close your browser.