Xanté aw 1200 Mode D'Emploi
3-26 PC: Installing Utilities and Drivers
5.
Click the PostScript tab (fig. 3.71).
Fig. 3.71 PostScript Tab
a.
In the PostScript output format box, select PostScript (optimized for
speed) if you have a Pentium processor. If not, select PostScript
(optimized for portability-ADSC).
speed) if you have a Pentium processor. If not, select PostScript
(optimized for portability-ADSC).
b.
Under PostScript header, select Download header with each print job.
c.
Under PostScript timeout values, make sure the settings are
• Job timeout: 0
• Wait timeout: 240
• Wait timeout: 240
6.
Click the General tab if you want to print a test page; next, click Apply and then
Print Test Page.
Print Test Page.
7.
Click OK. The Printer Properties window closes.
8.
Select File: Close. The Printers window closes.
Configuring the Printer
If necessary, configure the printer’s communication interface using XANTÉ Utilities.
For details, see chapter 5.
For details, see chapter 5.
See chapter 4 about configuring the Ethernet options, and see chapter 5 about
configuring communication for that utility.
configuring communication for that utility.