Xerox 721 Instruction De Maintenance
PRINTER OVERVIEW
XEROX WIDE FORMAT 721P PRINTER OPERATOR MANUAL
13
Operator Panel & Status Display
The operator panel is located on top of the front side of the printer.
It consists of a graphic display, a message display and several
function keys.
It consists of a graphic display, a message display and several
function keys.
1. Ready
Indicator
Flashes when the printer is warming up, and remains on steady
when the printer is ready to operate.
when the printer is ready to operate.
2. Door Open Indicator
This indicator flashes and an error code is displayed when a door
is opened, or the Inner Transport Unit is opened.
is opened, or the Inner Transport Unit is opened.
3. Toner Empty Indicator
This indicator flashes when the toner level is low.
When the toner supply is empty, the indicator is on steady and no
more prints can be made.
You can replace the Toner cartridge even if the printer is
operating.
When the toner supply is empty, the indicator is on steady and no
more prints can be made.
You can replace the Toner cartridge even if the printer is
operating.
4. Media Empty Indicator
This indicator flashes when the selected media roll is depleted.
5. Media Jam Indicator
This indicator flashes when media is jammed in the printer.
6. Wire-Clean
key
The Charge Scorotron Wire is cleaned when this key is pressed.
The Ready Indicator flashes during the cleaning process.
The Ready Indicator flashes during the cleaning process.
7. Exp-Clean
key
Lens Array of LED Print Head is cleaned when this button is
pressed. Ready Indicator flashes during the cleaning process.
pressed. Ready Indicator flashes during the cleaning process.
8. Media Roll Indicator
Displays the selected media roll for lead edge cut when the
SELECT key is pressed.
SELECT key is pressed.
9. Select key
Press this key to select the media roll desired for a lead edge cut.
10. Cut key
Press this key to feed and cut 240mm of the lead edge of the
selected roll.
selected roll.
11. Media Jam Location
Indicator
Indicator
Indicates the location where Jam has occurred.
12. Copy Density Indicator
The selected Print Density level is illuminated.
13. Copy Density Key
Use this key to temporarily increase or decrease the image
density.
density.
14. Menu,
→
→
→
→, ←
←
←
←, *, Enter,
Online
These keys are used for changing User Modes described in
Chapter 7. The Online Key is also used to place the printer Offline
and Online.
Chapter 7. The Online Key is also used to place the printer Offline
and Online.
15. Status Display
Error Codes, Status Codes and messages are displayed here.
Exp-Clean
Wire-Clean
Paper Deck
1 2 3 4
Select
Cut
MF
D1
D2
D3
D4
PF
Exit
Copy Density
Menu
Enter
Online
1
2
3 4
5
6
7
8
9
10
11
12
13
14
15