Xerox 721 Instruction De Maintenance

PROBLEM SOLVING

XEROX WIDE FORMAT 721P PRINTER OPERATOR MANUAL

Clearing Media Jam (J-13 & J-14)

When a jam J-13 or J-14 occurs, the media jams in the Fuser
Section.

1. Open the Right Side Door and turn the Inner Transport

Assembly handle to release the transport. Lower and lock the
transport by engaging the Down Lock.

2. If the media is not cut and the leading edge of the media has

reached the Drum or beyond the Drum, rotate the Cutter
handle to cut the media. Continue rotating the cutter handle
so that the green home position indicator appears in the
handle cut out.

3. If the leading edge of the media has reached the Fuser Unit,

open the Exit Cover.

WARNING

There are sharp edges on the Separation Fingers that rest against
the drum in the 3 o’clock position. Exercise caution when reaching
for the lead edge of the media.

4. Grasp the lead edge of the media.

5. Rotate the Fuser Handle while pulling on the media.

6. Release the Down Lock while holding the handle of Inner

Transport Assembly and lift it up gently until it stops. Then
twist the handle to the left to move the transport to the home
position. Finally, turn the handle to the right to lock the
transport.

6. Open the Manual Bypass Shelf or drawer in order to clear the

jammed media.

7. Rewind the jammed roll until the lead edge of the media

comes free of the feed rollers.

Fuser
Handle

Cutter
handle

Inner Transport handle

Down Lock

Exit

Copy Density

Enter

Online

Exit

Copy Density

Enter

Online

P-CLE

RE-CLE

EXIT

COPY

DENSIT

ENTER

SET

→

←

PERDE

CUT

SELECT