Xerox 300x Mode D'Emploi
Calibrating the Printer
3
User Manual
3-5
3.
Click the Print button to print the Gray Balance test print. The
printer automatically scales the image to fit on the media loaded in
the printer’s paper tray.
printer automatically scales the image to fit on the media loaded in
the printer’s paper tray.
The Gray Balance test print reflects the current calibration settings
known by the PhaserMatch application.
known by the PhaserMatch application.
The Gray Balance dialog box and test print show five clusters
representing five lightness levels: 5%, 10%, 25%, 40%, and 60%.
representing five lightness levels: 5%, 10%, 25%, 40%, and 60%.
The axes on each cluster represent the following colors:
cyan (+C)
magenta (+M)
yellow (+Y)
red (+R)
green (+G)
blue (+B)
magenta (+M)
yellow (+Y)
red (+R)
green (+G)
blue (+B)
The cells farther from the center of the cluster show increasing
amounts of the corresponding color in the gray values. The center
cell (00) shows the application’s current settings.
amounts of the corresponding color in the gray values. The center
cell (00) shows the application’s current settings.