Xerox 300x Mode D'Emploi
3
Calibrating the Printer
3-14
PhaserMatch
5.
When you have finished checking the test print and entering the
values, do one of the following:
values, do one of the following:
■
Make a second test print with the new values. Clicking the Print
button changes the values in the printer so the test print reflects the
new values. The values in the Gray Linearity dialog box are
displayed as 5, indicating that the grays shown in the center (5) box
of the test print now show your new settings.
button changes the values in the printer so the test print reflects the
new values. The values in the Gray Linearity dialog box are
displayed as 5, indicating that the grays shown in the center (5) box
of the test print now show your new settings.
■
Repeat Steps 3 and 4 for fine-tuning colors if the first adjustment is
not close enough to what you expected. The changes in gray levels
are smaller between boxes near the center than between boxes near
the ends, allowing you to fine-tune your selection that is now
shown in the center box.
not close enough to what you expected. The changes in gray levels
are smaller between boxes near the center than between boxes near
the ends, allowing you to fine-tune your selection that is now
shown in the center box.
■
Click Cancel to leave the last settings in place if you haven’t made
another test print or clicked OK.
another test print or clicked OK.
■
Click Restore Defaults to return the values in the dialog box to the
factory defaults. Click OK to send the default values to the printer.
factory defaults. Click OK to send the default values to the printer.
■
If you are satisfied with the adjustments, click OK to send the new
calibration settings to the printer. Clicking the OK button changes
the values in the printer.
calibration settings to the printer. Clicking the OK button changes
the values in the printer.
6.
If you want to save the new calibration settings to use again, select
Save Settings; the Save Calibration dialog box opens.
Save Settings; the Save Calibration dialog box opens.