These instructions are for Phaser 6121MFP/N or /D printer configurations connected by an
Ethernet cable to a network. If you have a Phaser 6121MFP/S printer configuration, see

Installing the Drivers for the Phaser 6121MFP/S

on page 41.

•

When you perform a standard installation of the software for a network-connected printer as
shown below, all of the drivers and utilities are installed automatically.

To install the drivers for your Phaser 6121MFP network-connected printer:
1. Verify that the printer is plugged in, turned on, and connected to the same active network as your

computer.

2. Insert the

Software and Documentation CD into your computer’s CD drive. The installer will start

automatically unless you have autorun disabled on your computer. If the installer does not start,
navigate to your computer’s CD drive and double-click the Setup.exe installer file.

Note:

If the

Software and Documentation CD is not available, you can download the latest driver

from

www.xerox.com/office/6121MFPsupport

3. At the setup screen, click Phaser 6121MFP/N / Phaser 6121MFP/D.
4. At the next screen, click Install Drivers.
5. At the next screen, click Install Print, Scan and Fax Drivers.
6. Read and then accept the License Agreement by clicking I Agree.

When the Printer Installation window appears, it will search for and list any discovered network
printers.