Xerox 7228 Mode D'Emploi

65 

Windows 95/98/Me Workstation Print Driver Installation 

 

Obtain the Print Driver for your workstation's operating system.  Drivers are available on one of the CD-
ROMs that came with your Device.  They are also typically available for downloading in self-extracting Zip 
file format from the Internet at www.xerox.com. 

 

1.  At the Desktop, right mouse click the Network Neighborhood icon ("My Network Places" in Windows 

Me). 

2.  Left mouse click on Properties. 

3.  Click on the Configuration TAB and verify that the TCP/IP Protocol has been loaded. 

4.  Note:  If the TCP/IP Protocol has NOT been loaded, click the Add button, select TCP/IP Protocol 

from the available list and click OK.  If the setup program fails to find the required files, you will have 
to click Have Disk... to load the protocol from the Operating System installer disk for this workstation. 

5. Click 

on 

 to highlight it, and click on the Properties button of the Configuration 

window. 

6.  If using Dynamic TCP/IP Addressing, select the radio button for Obtaining an IP Address 

Automatically, and supply the appropriate Server address information. 

7.  If using Static TCP/IP Addressing, left mouse click on the radio button marked “Specify an IP 

Address” to enable the manual configuration option. 

8.  Enter in the required IP Address, Subnet Mask, and Gateway information for this workstation.  For 

smaller networks, the Windows default values for Subnet Mask and Default Gateway may be 
applicable.  Check with a QUALIFIED Network Administrator for Subnet Mask and Default Gateway 
requirements. 

9. Click 

.