Xerox 7328 Manuel D’Utilisation
67
e.
Click [Apply].
f.
If changes were made to the SSL settings you may need to:
•
Reboot the system.
•
Close and reopen the client browser.
5.
To enable the ports:
a.
Click the [Properties] tab.
b.
Click the [Connectivity] folder, then Port Settings.
c.
On the SNMP line, click [Enabled].
d.
On the SMB line, click [Enabled].
e.
On the FTP Client line, click [Enabled].
f.
On the SOAP line, click [Enabled].
g.
Click [Apply].
If changes were made to the SSL settings you may need to reboot the system.
If changes were made to the SSL settings you may need to reboot the system.
6.
To ensure that IPv4 is enabled by default:
a.
Click the [Properties] tab.
b.
Click the [Connectivity] folder, then the [Protocols] folder.
c.
In the [Protocols] folder, click [TCP/IP].
d.
In the IP Mode area, on the IP Mode line, click or verify IPv4.
e.
If you clicked IPv4, click [Apply].
EIP applications can now register to the device.
EIP applications can now register to the device.
f.
You may need to map buttons to Custom Services at the Local User Interface in order to see the
new applications.
new applications.