Gembird nsw-r1 Mode D'Emploi
23
Step 4) Wireless Basic Settings
Wireless Access Point builds a wireless LAN and can let all PCs equipped with IEEE
802.11b or 801.11g wireless network adaptor connect to your Intranet. It supports WEP
and WPA2 encryption to enhance the security of your wireless network.
Wireless Access Point builds a wireless LAN and can let all PCs equipped with IEEE
802.11b or 801.11g wireless network adaptor connect to your Intranet. It supports WEP
and WPA2 encryption to enhance the security of your wireless network.
Menu
Description
Band
It allows you to set the AP fix at 802.11b or 802.11g mode.
You also can select B+G mode to allow the AP select
802.11b and 802.11g connection automatically.
You also can select B+G mode to allow the AP select
802.11b and 802.11g connection automatically.
Mode
It allows you to set the AP to AP, Client, WDS or AP +
WDS mode.
WDS mode.
Network Type
In client mode, you can specify your client to connect as an
infrastructure client or an ad hoc client.
infrastructure client or an ad hoc client.
SSID
This is the name of the wireless LAN. All the devices in the
same wireless LAN should have the same ESSID.
same wireless LAN should have the same ESSID.
Channel Number
The channel used by the wireless LAN. All devices in the
same wireless LAN should use the same channel.
same wireless LAN should use the same channel.
Enable MAC Clone
Check the check box will let router copy the first seen
MAC address to the WLAN MAC.
MAC address to the WLAN MAC.