Gembird nsw-r1 Mode D'Emploi
37
2.2.1 Static IP
Select Static IP address if your ISP has given you a specific IP address for you to use. Your ISP
should provide all the information required in this section. (See chapter 1 “Static IP” for more
detail)
should provide all the information required in this section. (See chapter 1 “Static IP” for more
detail)
2.2.2 DHCP Client
Choose the Dynamic IP selection if your ISP will automatically give you an IP address. Some
ISP’s may also require that you fill in additional information such as Host Name, Domain Name
and MAC address (see chapter 1 “DHCP Client” for more detail)
ISP’s may also require that you fill in additional information such as Host Name, Domain Name
and MAC address (see chapter 1 “DHCP Client” for more detail)
2.2.3 PPPoE (PPP over Ethernet)
Select PPPoE if your ISP requires the PPPoE protocol to connect you to the Internet. Your ISP
should provide all the information required in this section. (See chapter 1 “PPPoE” for more detail)
should provide all the information required in this section. (See chapter 1 “PPPoE” for more detail)
2.2.4 PPTP
Select PPTP if your ISP requires the PPTP protocol to connect you to the Internet. Your ISP
should provide all the information required in this section. (See chapter 1 “PPTP” for more detail)
should provide all the information required in this section. (See chapter 1 “PPTP” for more detail)
2.2.5 DDNS
DDNS allows you to map the static domain name to a dynamic IP address. You must get an
account, password and your static domain name from the DDNS service providers. This router
supports DynDNS, and TZO.
account, password and your static domain name from the DDNS service providers. This router
supports DynDNS, and TZO.