Gembird nsw-r1 Mode D'Emploi

Page de 66
 
45
Use 802.1x Authentication 
IEEE 802.1x is an authentication protocol. Every 
user must use a valid account to login to this 
Access Point before accessing the wireless LAN. 
The authentication is processed by a RADIUS 
server. Check this box to authenticates user by 
IEEE 802.1x.
 
 
Key Length                 WEP 64-bit
 
 
You can select the WEP key length for  
encryption, 64-bit or 128-bit. Larger WEP key 
length will provide higher level of security, but 
the throughput will be lower.  
 
WPA Authentication   
 
 
WPA can authenticate by RADIUS or by
 
Mode 
     
pre-shared key.
 
 
WPA/WPA2 Cipher 
You can choose TKIP or AES for WPA/WPA2 
key exchange method.
 
 
Pre-shared Key Format
 
You may select to select Passphrase 
(alphanumeric format) or Hexadecimal Digits (in 
the “A-F”, “a-f” and “0-9” range) to be the Pre-
shared Key. For example: 
Passphrase: iamguest 
Hexadecimal Digits: 12345abcde 
 
Pre-shared Key
 
The Pre-shared key is used to authenticate and 
encrypt data transmitted in the wireless network. 
Fill the text box by following the rules below.  
Hex WEP: input 64-digit Hex values (in the “A-F”, 
“a-f” and “0-9” range) or at least 8 character 
pass phrase as the pre-shared keys. 
 
Radius Server Port 
 
 
 
The service port of the external RADIUS server.
 
 
Radius Server IP 
 
 
 
The IP address of external RADIUS server.
 
 
Radius Server Password 
 
 
The password used by external RADIUS server.
 
 
Click <Apply> at the bottom of the screen to save the above configurations. You can now 
configure other advance sections or start using the router (with the advance settings in place) 
 
 
2.4.4 Access Control 
This wireless router provides MAC Address Control, which prevents the unauthorized 
MAC Addresses from accessing your wireless network.