Gembird nsw-r1 Mode D'Emploi
52
just click "Delete All" button. Click "Reset" will clear your
current selections.
current selections.
You can now configure other advance sections or start using the router (with the advance settings
in place)
in place)
2.5.3 MAC Filtering
If you want to restrict users from accessing certain Internet applications/services (e.g. Internet
websites, email, FTP etc.), then this is the place to set that configuration. Entries in this table are
used to restrict certain types of data packets from your local network to Internet through the
Gateway. Use of such filters can be helpful in securing or restricting your local network.
websites, email, FTP etc.), then this is the place to set that configuration. Entries in this table are
used to restrict certain types of data packets from your local network to Internet through the
Gateway. Use of such filters can be helpful in securing or restricting your local network.
Parameters
Description
Enable MAC Filtering
Check this box to enable the MAC filtering function.
Add a new entry into the list
Fill in the "MAC Address" and "Comment" of the filtering
rule to be added and then click "Apply ". Then specified
MAC will be added into the "Current Filter Table" below.
If you find any issues before adding it and want to retype
again. Just click "Cancel" and all inputed fields will be
cleared.
rule to be added and then click "Apply ". Then specified
MAC will be added into the "Current Filter Table" below.
If you find any issues before adding it and want to retype
again. Just click "Cancel" and all inputed fields will be
cleared.
Remove an entry from the list
If you want to remove some filter rule from the "Current
Filter Table", select the MAC Address you want to
remove in the table and then click "Delete Selected". If
Filter Table", select the MAC Address you want to
remove in the table and then click "Delete Selected". If