Gestetner 1045 Mode D'Emploi
Windows 95/98/Me Configuration
10
1
Setting up a Client Computer
This section describes the procedures for setting up a client on a network that
uses Windows 2000, Windows NT Server or Windows NT Workstation as a
print server.
To print from Windows 95/98/Me, you must first install the printer driver and
change the printer port to the print server.
uses Windows 2000, Windows NT Server or Windows NT Workstation as a
print server.
To print from Windows 95/98/Me, you must first install the printer driver and
change the printer port to the print server.
Note
❒ This section assumes that the client has already been configured to communi-
cate with a Windows 2000 or Windows NT print server. Do not begin the fol-
lowing procedure until the client has been set up and configured correctly.
lowing procedure until the client has been set up and configured correctly.
A
Install the printer driver as a local printer.
Reference
For more information about installing the printer driver, see the Printer
Unit Type 1045 Printer Reference 1.
For more information about installing the printer driver, see the Printer
Unit Type 1045 Printer Reference 1.
Note
❒ Any port can be selected during the installation, however, LPT1 is recom-
mended.
B
Click [Start], point to [Settings], and then click [Printers].
C
Click the icon of the printer you want to use. On the [File] menu, click [Prop-
erties]
erties]
.
D
Click the [Details] tab, and click [Add Port].
E
Click [Network], and click [Browse].
Windows 2000 or
Windows NT Print Server
Windows NT Print Server
Windows 95/98/Me