Gestetner 1302 Manuel D’Utilisation
Troubleshooting
42
3
h
h
h
h Loading Paper
Note
❒ If you want to change the paper
size, see p.48 “Changing the Paper
Size”.
Size”.
Reference
Regarding paper types and sizes
that can be used, see p.12 “Copy
Paper”.
that can be used, see p.12 “Copy
Paper”.
AAAA
Make sure that the paper tray is
not being used.
not being used.
BBBB
Pull out the paper tray until it stops.
CCCC
Push the metal plate down, and
then square the paper and load it
in the tray.
then square the paper and load it
in the tray.
Important
❒ Do not stack paper over the lim-
it mark.
❒ If paper is left in the paper tray
and then you add paper, a mis-
feed might occur.
feed might occur.
Note
❒ Shuffle the paper before setting
it in the tray.
DDDD
Push the paper tray in until it
stops.
stops.
Loading paper in the optional
paper tray unit
paper tray unit
AAAA
Make sure that the optional paper
tray unit is not being used.
tray unit is not being used.
BBBB
Pull out the paper tray until it
stops.
stops.
CCCC
While pinching the release lever,
adjust the back fence and side
fences.
adjust the back fence and side
fences.
DDDD
Push the metal plate down, and
then square the paper and load it
in the tray.
then square the paper and load it
in the tray.
Important
❒ If paper is left in the paper tray
and then you add paper, a mis-
feed might occur.
feed might occur.
❒ Do not stack paper over the lim-
it mark.
❒ Load paper so that the paper
touches the right side of the
tray, or misfeeds might occur.
tray, or misfeeds might occur.