Gestetner c7006dw Mode D’Emploi

Other Printing Problems

57

❒ If you cannot solve the problem by taking above actions, contact your sales or

service representative.

Changing the color settings 
with the printer driver caus-
es a drastic change in print-
out color.

With the IPDL-C printer driver, do not make radical 
changes to the settings on the 

 tab.

Also note that the sample shown by the printer driver 
is intended to show what processes are being applied, 
not exactly what your printout will look like.

Photograph printing looks 
rough.

With the IPDL-C printer driver, select 

 on 

the 

 tab.

Printing from some applications results in a loss of res-
olution.

Color documents are printed 
in black and white.

The printer driver is not set up for color printing. Select 

 in the color mode setting with the printer driver.

Some applications normally print color text as black 
and white.

Fine dot pattern does not 
print.

Select 

 in the 

 setting with the 

printer driver.

Solid areas, lines or text are 
shiny or glossy when created 
as a mixture of cyan, magen-
ta, yellow.

Select 

 in the 

 setting with the 

printer driver.

Black gradation is not natu-
ral.

Select 

 in the 

 setting with 

the printer driver.

Thin lines are blurred or 
light.

With the IPDL-C printer driver, select the 

 check 

box on the 

 tab.

When printing on OHP 
transparencies, a sheet of pa-
per is not placed between 
printed OHP transparencies.

The size and direction of the paper loaded in the paper 
tray are different from those of the OHP transparency. 
Load paper of the same size and orientation as the 
OHP transparencies in the paper tray.

The "OHP Slip" setting is set to "Off” (

 P.83). Change 

the setting with operation panel.

The page layout has 
changed.

The printable area differs from printer to printer. A 
document that when printed by another printer fits on 
a single page might not fit on one page when printed 
by this printer. From the IPDL-C printer driver, check 
the 

 on the 

 tab.