Gestetner c7006dw Mode D’Emploi
Replacing Consumables
81
4
D
Push the right and left lock levers
of the charger.
The locks release, and the charger
is lifted slightly.
of the charger.
The locks release, and the charger
is lifted slightly.
E
Remove the charger.
F
Install a new charger into the
printer.
Insert the new charger into the
printer with the arrow of the
charger cleaner's lever facing to-
ward you. The charger locks auto-
matically.
printer.
Insert the new charger into the
printer with the arrow of the
charger cleaner's lever facing to-
ward you. The charger locks auto-
matically.
Note
❒ Return the charger cleaner to
the left or print problems may
occur.
occur.
G
Holding the green inset grips of
the new photoconductor unit,
push the unit back to its original
position.
the new photoconductor unit,
push the unit back to its original
position.
H
Close the front cover.
Confirm that the front cover closes
properly.
Confirm that the front cover closes
properly.
I
Turn on the printer’s power switch.
J
Press {
Menu
}.
The following message appears on
the panel display.
the panel display.
<Menu> j
IPDL-C Menu l
K
Press {T} or {U} to display
“Maintenance”, and then press
{
“Maintenance”, and then press
{
Enter
}.
<Menu> j
Maintenance l
L
Confirm that “1.Reinstall” is on
the display, and then press {
the display, and then press {
Enter
}.
<Maintenance> j
1.Reinstall l
M
Press {
Enter
}.
<Reinstall>
Charger
N
Press {
Enter
}.
<Charger>
Press # key
The counter is cleared and returns
to the “Maintenance” menu.
to the “Maintenance” menu.
O
Press {
On Line
}.
The "Ready" message appears on
the panel display.
the panel display.
TFWX450E
TFWX460E
TFWS020E
Data In
On Line Reset
Escape
Menu
Media
Power
Enter
Error