Gestetner 3245e Mode D’Emploi
Reading the Display
11
1
Standby Display
While the machine is in standby mode (immediately after it is turned on or after
the
the
{
Clear Modes/Energy Saver
} key is pressed), the following display is shown.
❖
❖
❖
❖
Memory Transmission
❖
❖
❖
❖
Immediate Transmission
Note
❒ To return the machine to standby mode, do one of the following:
• If you have set an original and are in the sending process, remove the orig-
inal.
• If you have not set an original and are in the sending process, press the
{
Clear Modes/Energy Saver
} key.
• If you are in User Tools mode, press the
{
User Tools/Counter
} key.
Communication Display
While the machine is communicating the status is displayed.
❖
❖
❖
❖
Display during Memory Transmission or Memory Reception:
Note
❒ Even when the machine is sending or receiving a fax message from/into
memory, you can still scan the next original into memory.
⇒
P.13 “Dual Ac-
cess”
❖
❖
❖
❖
Immediate Transmission:
Chapter1 Page 11 Thursday, January 27, 2000 1:53 PM