Gestetner 3532 Guide De Réglage Du Réseau

Remote Maintenance by telnet

71

-

-

-

-Address

❖

❖

❖

❖ Subnet Mask

A number used to mathematically
“mask” or hide the IP address on
the network by eliminating those
parts of the address that are alike
for all the machines on the net-
work.

❖

❖

❖

❖ Broadcast address

A specified address for sending
data to specific devices on the net-
work.

❒ To get the above addresses, contact

your network administrator.

❒ If you don't know the address to

configure, use the machine's de-
fault.

❒ The Ethernet interface and IEEE

802.11b interface share the same
TCP/IP address. When changing
interfaces, the former interface set-
ting is applied to the new interface. 

❒ When installing the optional 1394

interface board, set the subnet so it
does not overlap with the Ethernet
interface or the 1394 interface.

Use the access command to view and
configure access control. You can also
specify two or more access ranges.

❖

❖

❖

❖ Reference

❖

❖

❖

❖ Configuration

✩ range start-

•

✩ represents a target number
between 1 and 5. (Up to five ac-
cess ranges can be registered
and selected.)

Example: To specify accessible IP
addresses between 192.168.0.10
and 192.168.0.20:
m s h >   a c c e s s   1   r a n g e
192.168.0.10 192.168.0.20

❒ The access range restricts the

workstations from which print-
ing is possible by means of an
address. If you do not need to
restrict printing, make the set-
ting “0.0.0.0”.

❒ The entry is invalid if the start

address is greater than the end
address.

❒ Up to five access ranges can be

specified. The entry is invalid if
the target number is omitted.

❒ Sessions other than those from a

Web browser 

  or  telnet  are

limited by access control.

*1

This does not include viewing

and file management with the

Document Server.

❖

❖

❖

❖ Access control initialization 

❒ This restores the factory default

so all access ranges become
“0.0.0.0”.

Use the dhcp command to configure
the DHCP settings.

❖

❖

❖

❖ Reference

The following command displays
the current DHCP settings.