Gestetner 3532 Mode D’Emploi

7

This section gives instructions for connecting the machine and computer, config-
uring the machine and installing software.

❖

❖

❖

❖ When operating the machine with a parallel connection, USB connection, or SCSI

A

Connect the machine and the computer with a parallel cable, a USB cable,
or an IEEE 1394 (SCSI print) cable.

Reference
For more information, see p.8 “Connecting the Machine”.

B

Install a printer driver from the CD-ROM.

Reference
For more information, see p.14 “Installing the Software”.

❖

❖

❖

❖ When operating the machine under a network environment

A

Configure the network using the machine's control panel.

Reference
For more information, see "Network Configuration", Network Guide.

B

Install a printer driver and other utilities from the CD-ROM.

Reference
For more information, see p.14 “Installing the Software”.

❒ "Network environment" describes a situation where the machine is connected

to a computer via Ethernet, wireless LAN, or IEEE 1394 (IP over 1394) inter-
face.

❒ The optional IEEE 1394 board for SCSI print connection and the optional USB

2.0 board for USB connection cannot be both installed in the machine.