Gestetner 5308l Mode D'Emploi
Placing a New Roll of Tape in the Tape Dispenser (Option)
79
4
Placing a New Roll of Tape in the Tape
Dispenser (Option)
Dispenser (Option)
Note
❒ Make sure that the main switch is
turned on and the power switch of
the tape dispenser is off.
the tape dispenser is off.
A
Open the cover of the tape dis-
penser.
penser.
B
As shown, put the roll in the dis-
penser.
penser.
Note
❒ Make sure that the tape is in-
stalled in the proper direction. If
it is not in the correct direction,
the tape dispenser will not work
correctly.
it is not in the correct direction,
the tape dispenser will not work
correctly.
C
Feed the leading edge of the roll in
the dispensing slot until it stops.
the dispensing slot until it stops.
Note
❒ Push the tape as far as possible
through the slot.
D
Turn on the power switch of the
tape dispenser.
tape dispenser.
E
Press the manual cut button to trim
off the leading edge of the tape.
off the leading edge of the tape.
TSLP010E
TSLP011E
TSLP012E
TSLP013E
On
Off
TSLP014E
SilverV-EN.book Page 79 Monday, May 15, 2000 3:23 PM