Gestetner 5455 Manuel D’Utilisation
Troubleshooting
180
5
EEEE
Return the document feed sheet
to its original position.
to its original position.
FFFF
Close the document feeder (ADF)
cover until it clicks in position
and if necessary, close the docu-
ment feeder.
cover until it clicks in position
and if necessary, close the docu-
ment feeder.
-
-
-
-To prevent originals
misfeeding:
Placing the following kinds of origi-
nals on the exposure glass may cause
misfeeds.
• Originals heavier than 128g/m
nals on the exposure glass may cause
misfeeds.
• Originals heavier than 128g/m
2
, 34 lb
• Originals lighter than 52g/m
2
, 14 lb
• Originals smaller than 148mm
×
210mm, 5.9"
× 8.3"
• Originals larger than 297mm
×
864mm, 11.6"
× 34.0"
• Stapled or clipped originals
• Perforated or torn originals
• Curled, folded, or creased origi-
• Perforated or torn originals
• Curled, folded, or creased origi-
nals
• Originals with any kind of coating,
such as thermal fax paper, art pa-
per, aluminum foil, carbon paper,
or conductive paper
per, aluminum foil, carbon paper,
or conductive paper
• Bound originals such as books
• Damaged originals
• Originals with glue on them
• Pasted originals
• Damaged originals
• Originals with glue on them
• Pasted originals
• Originals written in pencil
• Thin originals that have low stiff-
• Thin originals that have low stiff-
ness
• Originals with index tabs
• Transparent originals such as OHP
• Transparent originals such as OHP
transparencies or translucent pa-
per
per
Note
❒ Do not mix different sizes of origi-
nals in the optional document
feeder.
feeder.
❒ Remove staples or paperclips from
originals. Fan originals that have
had staples or paperclips removed.
had staples or paperclips removed.
❒ Do not stack originals above the
limit mark.
ZDCY100E