Gestetner ao40 Manuel D’Utilisation

Basics

Recommended Paper

• Standard paper sizes that can be used in this copier are shown below.

• When you make a copy on a non-standard size of paper, set the paper on the

Copy Paper Table.

• Weight of paper suitable for this copier: 51g/m

, 14lb to 134g/m

, 36lb.

• Do not use the following kinds of paper or a paper jam might occur.

• Bent, folded, or creased paper
• Torn  paper
• Perforated  paper
• Non-smooth  paper
• Slippery paper
• Thin paper that has low stiffness

• Do not make a copy on paper with any kind of coating, such as thermosensi-

tive paper, art paper, aluminum foil, and carbon paper.
A fault might occur.

• Do not use paper with strong curls at the edges or corners. (Curls rising more

than 5mm (1/4") or falling more than 20mm (3/4") over a 40mm (1.5") radius.)

• When you make copies on film, take out the copies delivered to the copy

guide one sheet at a time and place them on a flat surface.

• If copying to natural tracing paper (all pulp, translucent paper) at a relative

humidity of 35% or less

If the paper was left out of its package for 5 minutes or more, remove the
first 1000mm (39.3") before copying.

If copies come out wavy or with white spots, use translucent paper instead
of natural tracing paper.

Always keep the paper in a bag when not using it.

• Store the paper in a sealed polyvinyl bag if not used for a long period.

If it gets humid, paper will curl or wave which can cause a paper jam or part
of the image not to be copied.

Metric version

Inch version

Bypass

Roll Feeder

E (36"

48")

D (24"

36")

C (18"

24")

B (12"

18")

A (9"

12")