Gestetner ao70 Mode D’Emploi

Page de 89
11
1. Basics
Starting The Machine
To start using the machine, press the
main power switch or the operation
switch to turn the machine on.
Preparation
If you will not be using the ma-
chine for a long time, turn the main
power switch off. For example,
turn the switch off before holidays.
Otherwise, turn the operation
switch off and on to use the ma-
chine.
Turning On the Main Power
A
Make sure that the power plug is
firmly inserted into the wall out-
let.
B
Turn the main power switch on.
The power indicator lights up
when the power comes on.
Turning On the Power
A
Press the operation switch, and
the power indicator lights up.
Note
❒ If the machine does not start
even when the operation switch
is pressed, check that the main
power switch is in the On posi-
tion.
❒ The machine can be used about
two minutes after it has been
switched on.
❒ Immediately after the machine is
turned on, or if the temperature is
low, or if making a lot of continu-
ous copies (more than 30 sheets/
A0, or more than 30 sheets/E
size), the continuous copy speed
may be reduced to ensure the
toner fuses to the paper.
❒ The machine automatically en-
ters Energy Saver mode or turns
itself off if you do not use it for
a while. See Panel Off Timer,
Energy Saver Timer, and Auto
Off Timer in the Systems Set-
tings manual.
ZEDH090E
ZEDH110E
DolphinGB-Copy-F_V4_FM.book  Page 11  Monday, June 11, 2001  5:02 PM