Gestetner ao70 Mode D’Emploi
Basic Functions
43
2
Limitation
❒ If you select the tray paper type
setting to [Translucent ] or [Film] (ex-
cept for [Plain] or [Recycled paper]),
the auto paper select function will
not be used. For tray paper type
setting, see "Tray Paper Type" in
the System Settings manual.
cept for [Plain] or [Recycled paper]),
the auto paper select function will
not be used. For tray paper type
setting, see "Tray Paper Type" in
the System Settings manual.
❒ If the type of paper changes when
you select the paper source, it may
take longer for copying to start.
take longer for copying to start.
❒ When using a 30" width original,
set the original size auto detect set-
ting to off. See p.128 “Original Size
Auto Detect”
ting to off. See p.128 “Original Size
Auto Detect”
Note
❒ If you press the {Clear Modes/Energy
Saver
} key immediately after turn-
ing the power on, you can specify
the paper roll to be used as the de-
fault setting for Auto Reset. The
default setting is paper roll 1. See
p.127 “Paper Roll Priority”
the paper roll to be used as the de-
fault setting for Auto Reset. The
default setting is paper roll 1. See
p.127 “Paper Roll Priority”
❒ In Auto Paper Select mode, load
the proper paper size in the paper
tray or select the magnification ra-
tio for the paper currently loaded
in the paper tray, and then set your
original again.
tray or select the magnification ra-
tio for the paper currently loaded
in the paper tray, and then set your
original again.
Reference
⇒ p.46 “Copying from the Bypass
Tray”
Tray”
Auto paper select
A
Make sure that the [Auto Paper Se-
lect]
lect]
key is selected.
Note
❒ When Auto Paper Select is se-
lected, it may take slightly long-
er for copies to make since the
machine selects the paper after
scanning the original.
er for copies to make since the
machine selects the paper after
scanning the original.
Manual paper select
A
Select the paper roll 1, paper roll
2, paper roll 3 (option), or bypass
tray.
2, paper roll 3 (option), or bypass
tray.
DolphinGB-Copy-F_V4_FM.book Page 43 Monday, June 11, 2001 5:02 PM