Gestetner ao70 Mode D’Emploi
Copying
64
2
Size Magnification
You can calculate a ratio from the
lengths of the original and copy for
enlarging or reducing the copy.
lengths of the original and copy for
enlarging or reducing the copy.
Preparation
Measure and specify the lengths of
the original and copy by compar-
ing "A" with "a".
The enlargement or reduction ratio
is automatically calculated, elimi-
nating the need to calculate the ra-
tio yourself.
the original and copy by compar-
ing "A" with "a".
The enlargement or reduction ratio
is automatically calculated, elimi-
nating the need to calculate the ra-
tio yourself.
Limitation
❒ The ratio is selected from within
the range of 25.0% – 400.0%.
❒ If the calculated ratio is less than
25%, the ratio is set to 25.0%, if it is
more than 400%, it is set to 400.0%.
more than 400%, it is set to 400.0%.
❒ You cannot use Size Magnification
if Auto Paper Select is selected.
A
Press the [Reduce/Enlarge] key.
B
Press the [Size Magnification] key
C
Enter the length of the original
with the number keys, and then
press the [#] key.
with the number keys, and then
press the [#] key.
Note
❒ To change the value, press the
[Clear]
key, and then enter the
new value.
D
Press the [Copy___mm (inch)] key
on the screen, and then enter the
copy length with the number
keys. Then press the [#] key.
on the screen, and then enter the
copy length with the number
keys. Then press the [#] key.
Note
❒ To change the value, press the
[Clear]
key, and then enter the
new value.
E
Press the [OK] key.
ZEDG070E
DolphinGB-Copy-F_V4_FM.book Page 64 Monday, June 11, 2001 5:02 PM