Gestetner cs331 Instruction De Maintenance
1
2
3
4
5
6
7
9
10
11
12
8
5-12
USING THE EDITING FUNCTIONS
- If the optional finisher (SR940) equipped with the saddle
stitcher is installed, copies can be automatically stapled
along their center line. To have copies stapled, press the
STAPLE ON key.
along their center line. To have copies stapled, press the
STAPLE ON key.
- Maximum number of sheets that can be stapled
Page 7-7
If the binding margin is set as less than 12mm and the STAPLE
ON key is pressed, the paper may not exit normally.
ON key is pressed, the paper may not exit normally.
Select other copy modes as required.
6
Press the START key.
- When placing an original on the glass, perform steps 5 to 6
on page 2-3 continuously.
7. MAGAZINE SORT (FROM THE EDITING MENU) (Cont.)
5
Adjust the binding margin and press the SET key.
- The default width of the margin is 12 mm.
- To adjust the width, press the 2mm or 30mm key to
select the desired number, then press the SET key.