Gestetner cp6244 Mode D’Emploi
Energy Saver Mode
19
1
Energy Saver Mode
If the machine has not been operated for a certain period of time after printing,
or when you press and hold the
or when you press and hold the
{{{{Clear Modes/Energy Saver}}}} key for 3 seconds, the
panel display goes off and the machine enters Energy Saver mode. In Energy
Saver mode, the machine consumes less electricity. Press the
Saver mode, the machine consumes less electricity. Press the
{{{{Clear Modes/Energy
Saver
}}}} key again, and the machine will return to the ready condition.
Note
❒ By default, the time taken for the machine to shift to Energy Saver mode is 3
minutes.
❒ You can change the waiting time within a range of 1 to 120 minutes. See “6
Energy Saving”on p.72 “1 System”.
❒ In the following cases, the machine will not shift automatically to Energy Sav-
er mode.
• If there is no ink
• If originals are or paper is jammed
• If the machine has not finished making masters or prints
• If the machine is printing the second page of a Combine print
• If there is no master
• If the master eject box is full
• If there is an original in the optional document feeder
• If the “cover open” indicator is lit
• If you are in the process of making changes to the user tools
• If the screen for entering a user code is displayed
• If there is no ink
• If originals are or paper is jammed
• If the machine has not finished making masters or prints
• If the machine is printing the second page of a Combine print
• If there is no master
• If the master eject box is full
• If there is an original in the optional document feeder
• If the “cover open” indicator is lit
• If you are in the process of making changes to the user tools
• If the screen for entering a user code is displayed