Gestetner cp6244 Mode D’Emploi
Adjusting the Print Image Density
23
1
Adjusting the Print Image Density
You can adjust the print image densi-
ty to suit your needs.
ty to suit your needs.
Note
❒ You can specify the image density
that is selected by default when the
power is turned on. See “1 MSTR
Makg.Density” on p.74 “3 Initial
Setting”.
power is turned on. See “1 MSTR
Makg.Density” on p.74 “3 Initial
Setting”.
AAAA
Press the
{{{{Image Density}}}} key.
Note
❒ If your original has a colored
background such as red or blue,
select a lighter image density to
prevent the prints from appear-
ing dirty.
select a lighter image density to
prevent the prints from appear-
ing dirty.
BBBB
Set your original.
CCCC
Enter the number of prints with
the number keys.
the number keys.
DDDD
Press the
{{{{Start}}}} key.
Printing starts automatically after
the trial print.
the trial print.
Note
❒ If you wish to check the image
before printing, press the
{{{{Auto
Cycle
}}}} key before pressing the
{{{{Start}}}} key, in order to disable
Auto Cycle mode. See p.17
“When Auto Cycle mode is off”.
“When Auto Cycle mode is off”.
ZLKS080N
ZLKS032N
ZLKS030N