Gestetner cp6244 Mode D’Emploi
Operation
52
1
Skip Feed Printing
If the backs of prints are dirty, you
can use the
can use the
{{{{Skip Feed}}}} key to make
the drum rotate twice instead of once
with every sheet of paper fed. This
gives you time to remove prints one
by one from the paper delivery tray,
or to insert a sheet of paper between
two prints.
with every sheet of paper fed. This
gives you time to remove prints one
by one from the paper delivery tray,
or to insert a sheet of paper between
two prints.
Note
❒ You can specify how many times
that the drum rotates when the
power is turned on. Alternatively,
you can also choose whether or not
to change the number of rotations
temporarily when the
power is turned on. Alternatively,
you can also choose whether or not
to change the number of rotations
temporarily when the
{{{{Skip Feed}}}}
key is pressed. See “8 No. of Skip
Feed” on p.75 “4 Mode Setting”.
Feed” on p.75 “4 Mode Setting”.
❒ The number of rotations can be set
from 2 to 9.
❒ The default is 2.
AAAA
Press the
{{{{Skip Feed}}}} key.
BBBB
Set your original.
CCCC
Enter the number of prints with
the number keys.
the number keys.
DDDD
Press the
{{{{Start}}}} key.
Printing starts automatically after
the trial print.
the trial print.
Note
❒ If you wish to check the image
before printing, press the
{{{{Auto
Cycle
}}}} key before pressing the
{{{{Start}}}} key, in order to disable
Auto Cycle mode. See p.17
“When Auto Cycle mode is off”.
“When Auto Cycle mode is off”.
ZLKS085N
ZLKS030N