Gestetner cp6244 Mode D’Emploi
Operation
56
1
Entering a User Code to Use the Machine
Under the User Code mode, users
need to enter a user code before they
can use the machine. The machine
keeps count of the number of copies
made under each user code.
need to enter a user code before they
can use the machine. The machine
keeps count of the number of copies
made under each user code.
Note
❒ To use this feature, User Code
mode must be set to “On”. See “3
Set User Code” on p.77 “5 Admin.
Mode”.
Set User Code” on p.77 “5 Admin.
Mode”.
❒ When the User Code mode is on,
the machine will prompt you for
your user code when you turn on
the main switch, or after the ma-
chine has been reset.
your user code when you turn on
the main switch, or after the ma-
chine has been reset.
❒ The following user codes are avail-
able:
• 000, 019, 028, 037, 046, 055, 064,
• 000, 019, 028, 037, 046, 055, 064,
073, 082, 091, 100, 119, 128, 137,
146, 155, 164, 173, 182, 191, 200,
219, 228, 237, 246, 255, 264, 273,
282, 291, 300, 319, 328, 337, 346,
355, 364, 373, 382, 391, 400, 419,
428, 437, 446, 455, 464, 473, 482,
491, 500, 519, 528, 537, 546, 555,
564, 573, 582, 591, 600, 619, 628,
637, 646, 655, 664, 673, 682, 691,
700, 719, 728, 737, 746, 755, 764,
773, 782, 791, 800, 819, 828, 837,
846, 855, 864, 873, 882, 891, 900,
919, 928, 937, 946, 955, 964, 973,
982, 991
146, 155, 164, 173, 182, 191, 200,
219, 228, 237, 246, 255, 264, 273,
282, 291, 300, 319, 328, 337, 346,
355, 364, 373, 382, 391, 400, 419,
428, 437, 446, 455, 464, 473, 482,
491, 500, 519, 528, 537, 546, 555,
564, 573, 582, 591, 600, 619, 628,
637, 646, 655, 664, 673, 682, 691,
700, 719, 728, 737, 746, 755, 764,
773, 782, 791, 800, 819, 828, 837,
846, 855, 864, 873, 882, 891, 900,
919, 928, 937, 946, 955, 964, 973,
982, 991
AAAA
Enter your 3–digit user code with
the number keys.
the number keys.
Note
❒ The user code will not dis-
played on the panel display.
❒ If you have made a wrong en-
try, press the
{{{{Clear/Stop}}}} key
and enter the number again.
BBBB
Press the
{{{{OK}}}} key.
CCCC
After printing, hold down the
{{{{Clear Modes/Energy Saver}}}} key, and
then press the
then press the
{{{{Clear/Stop}}}} key.
The User Code mode is once again
set. Other users will not be able to
make prints using your user code.
set. Other users will not be able to
make prints using your user code.