Gestetner ao80 Mode D’Emploi
Copying
22
2
EEEE
Enter the number of copies using
the number keys.
the number keys.
Note
❒ The copy quantity is from 1 to
99.
FFFF
Place the originals.
Originals feed into the machine,
which then starts copying.
Originals feed into the machine,
which then starts copying.
Reference
p.15 “Placing Originals”
Note
❒ When [Press Start Key] is select-
ed in the Feed Start Method,
copying starts when you press
the
copying starts when you press
the
{{{{Start}}}} key. See “Feed Start
M e t h o d ” , G e n e r a l S e t t i n g s
Guide”.
Guide”.
❒ To stop originals feeding in,
press the
{{{{Scanner Stop}}}} key. See
p.16 “To stop originals feeding
in”.
in”.
❒ Insert the original so that the
right edge is aligned with the
original guide.
original guide.
❒ The continuous copy speed may
be slow down to ensure the ton-
er fuses to paper in the follow-
ing cases:
• When the machine is just
er fuses to paper in the follow-
ing cases:
• When the machine is just
turned on
• When the temperature is low
• When making a lot of contin-
• When making a lot of contin-
ues copies (more than 30
sheets/A0, E)
sheets/A0, E)
Important
❒ When Basic Authentication, Win-
dows Authentication, or LDAP
Authentication is set, always
log off when you have finished
using the machine to prevent
unauthorized users from using
the machine.
Authentication is set, always
log off when you have finished
using the machine to prevent
unauthorized users from using
the machine.
-
-
-
-To stop the machine during a
multi-copy run
Press the
{{{{Clear/Stop}}}} key after the
originals have fed in. The machine
stops when the current copy finishes.
Press [Stop] to cancel the copy job;
press [Continue] to resume the inter-
rupted copy job.
stops when the current copy finishes.
Press [Stop] to cancel the copy job;
press [Continue] to resume the inter-
rupted copy job.
Original Counter/Reset
The number of scanned originals is
displayed in the screen's top right cor-
ner. This allows you to check the
number of originals in a job, or if any
sheets have been fed together, and the
number of copies that will be stored
in the copy output tray.
displayed in the screen's top right cor-
ner. This allows you to check the
number of originals in a job, or if any
sheets have been fed together, and the
number of copies that will be stored
in the copy output tray.
Resetting the original counter
AAAA
Press [Orig.] and the counter num-
ber in the screen's top right cor-
ner.
The number is reset to 0.
ber in the screen's top right cor-
ner.
The number is reset to 0.
DolphinC2_ENcopy_F_FM.book Page 22 Friday, February 25, 2005 10:46 AM